Instructions:
Cutting:
1.Cut a modular cable to the desired length. Make sure that all the ends of the cable are cut equally long
Stripping:
a. For 8P cables
1. Insert the cable through the stripper blades until it reaches the end of the stripping hole behind the blades at the other side of the tool
2. Squeeze the handles and pull the tool, make sure the cable remains perpendicular to the tool
b. For 6P cables
1. Insert the cable through the stripper blades until it touches the stop point before the second blade
2. Squeeze the handles and pull the tool, make sure the cable remains perpendicular to the tool
c. If done correctly the outer insulation of the cable will be removed without damaging the insulation of the inner conductors
Crimping:
a. For 8P modular plugs
1. Insert a modular plug in the 8P modular plug holder of the tool so that the gold contacts face the crimping device
2. Insert the prepared cable into the plug, the inner conductors of the cable should be placed firmly against the tip of the modular plug connector and should be located exactly under the gold contacts of the plug
3. Complete the work by squeezing the handles firmly to set the contacts and secure the cable
b. For 6P modular plugs
1. Insert a modular plug in the 8P modular plug holder of the tool so that the gold contacts face the crimping device
2. Insert the prepared cable into the plug, the inner conductors of the cable should be placed firmly against the tip of the modular plug connector and should be located exactly under the gold contacts of the plug
3. Complete the work by squeezing the handles firmly to set the contacts and secure the cable